InnoFLUX has especially been developed for making electrical connections, which require high quality, reliability, long life span and water tightness. InnoFLUX consists of a heat-shrinkable polymeric sleeve containing two solder rings with an incorporated flux and two thermoplastic sealing rings. It’s very easy to install, the quality of the connection can be visually checked and it requires no special tools. InnoFLUX is available in five sizes, coded by the international colour code system, and suitable for the most frequent cable diameters. It can be applied on both twisted (flexible) and solid (rigid) conductors, suitable for copper as well as tinned wires, whether combined or not.

Unique composition
• shrinkable kynar sheath: flame-retardant, remains flexible, high insulating power.
• 2 solder rings (except InnoFLUX Clear) with incorporated flux: no voltage loss, solid connection, perfectly smooth flow.
• thermoplastic adhesive sealing rings seals completely

Available in:
• Clear - 0.3 - 0.8mm2
• Red - 0.8 - 2.0mm2
• Blue - 2.0 - 4.0mm2
• Yellow - 4.0 - 6.0mm2
• Grey - 6.0 - 10.0mm2

Innolock High Strength is designed for bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25mm and where maximum strength at room temperature is required.

Innolock Low Strength is designed for locking and sealing of threaded fasteners, which require easy disassembly with standard hand tools.

Innolock Medium Strength is designed for locking and sealing of threaded fasteners, which require easy disassembly with standard hand tools.

Inno OIL SEAL stops and prevents oil leaks on gaskets and sealing rings. Use as a preventive measure on car engines of more than 3 years old. Optimal results achieved after a short running in period of 100 miles for vehicles and after 1 to 3 weeks for machines and hydraulics systems.

Inno STOP seals leaks in radiators (metal and plastic) small leaks and hairline cracks in head gasket, motor blocks and water coils. Inno STOP is a water-based suspension of non-clogging particles, anti-corrosion and lubricating additives. Inno STOP is developed to make fast emergency repairs to leaking radiators and cooling systems. In case of minor leaks, the repair can be permanent. The soft particles do not clog the radiator and do not influence the action of the mechanical parts of the cooling system. Inno STOP can be used in all types of radiators and is compatible with all types of water-based coolants.

A conformable, self-amalgamating tape based on polyisobutylene, colour black. For joining (splicing) and repair of a wide range of power and distribution cables up to 46kV.

Innotex is a flexible, heat shrinkable dual wall tubing with an integrally bonded meltable adhesive inner liner, designed to offer permanent moisture-proof encapsulations to a wide variety of substrates.
With a shrink ratio of 3 to 1, Innotex is available in the following sizes: 3.0mm-4.8mm-6.4mm-9.4mm-12.7mm-19.7mm-25.4mm and 40mm

Megasil Black is a high temperature silicone gasket maker, which remains flexible and durable after curing.
Resistant to temperatures from -60ºC to +205ºC (peaks up to +260ºC).
Available in a handy 215ml pressure pack or a 310ml cartridge.

Megasil Red is a high temperature silicone gasket maker, which remains flexible and durable after curing.
Resistant to temperatures from -60ºC to +305ºC (peaks up to +330ºC.
Available in a handy pressure pack of 215ml or a 310ml cartridge.